Make sure the caliper is cool
Never apply the sticker to a warm or hot brake caliper. Let the car cool down completely before you start.
01 — Cool surfaceDo not apply to a hot caliper.
Installation Guide
Apply brake caliper stickers in 9 simple steps
Follow this guide for a clean OEM look, strong adhesion, and a long-lasting result.
9
Clear steps from preparation to adhesion
±10 min
Average installation time per set with proper preparation
24 hrs
Curing time for the best and most durable result
What you need
What do you need?
A clean result starts not with applying the sticker, but with a clean, dry, and grease-free surface.
Have these ready before you start
- Carimprasso brake caliper stickers
- Degreaser or isopropyl alcohol cleaner
- Clean microfibre cloth
- Optionally masking tape to mark the position
- A card or squeegee to press the sticker down
- Patience and a dry, clean surface
Preparation
First: clean, cool, and dry
These three steps largely determine how clean and durable the sticker will look.
Do not apply to a hot caliper.
Clean the caliper thoroughly
Clean the caliper with degreaser or isopropyl alcohol. Remove dirt, grease, brake dust, and any old residue.
02 — DegreaseClean with degreaser or alcohol.
Let it dry completely
Do not apply the sticker to a damp surface. Wait until the caliper is completely dry.
03 — DryMake sure the surface is fully dry.
Applying the sticker
From transfer film to finished result
Work calmly and precisely. Positioning carefully and peeling the film slowly are key to a clean finish.
Press the transfer film firmly
Press the transparent transfer film firmly onto the sticker before removing the backing. Use a card or squeegee if needed.
04 — Press transfer filmPress the film firmly onto the sticker.
Remove the backing carefully
Peel the paper backing off slowly. Check that all parts are coming away with the transfer film.
05 — Remove backingPeel the backing off slowly.
Find the right position
Hold the sticker loosely against the caliper first. Check that the logo is straight and fits the shape well.
06 — PositionFind the right spot first.
Apply the sticker carefully
Place the sticker gently onto the caliper. Press from the centre outward to avoid air bubbles.
07 — ApplyPress from the centre outward.
Remove the transfer film slowly
Peel the transfer film off slowly at an angle. Check that the sticker stays in place and press the edges down firmly.
08 — Remove filmPeel the film off slowly at an angle.
Let the sticker cure
Avoid washing, high pressure, rain, or extreme heat in the first 24 hours after installation.
09 — CureWait at least 24 hours before washing.
Visual guide
How the transfer film works
The sticker consists of three layers: the paper backing, the sticker itself, and the transparent transfer film. Work calmly and always check that the logo is coming away correctly.
01
Press transfer film
Press the film firmly
Use a card or squeegee and press the transfer film firmly over the logo.
02
Remove backing
Peel off the backing
Remove the paper backing slowly while the logo stays attached to the transfer film.
03
Place sticker
Apply to the caliper
Position the sticker carefully and press it down from the centre outward.
04
Remove film
Peel the film away
Remove the transfer film slowly at an angle. Then press the edges down firmly.
Important tips
Avoid these mistakes
The stickers are made for a sharp automotive look, but the surface and installation determine the final result.
- Make sure the sticker is at room temperature. In warm weather, place the stickers in the fridge for 10 minutes before applying.
- Do not apply the sticker to a warm caliper.
- Do not apply to dust, grease, brake dust, or moisture.
- Do not peel the sticker off multiple times to reposition it.
- Do not use high-pressure washing or a car wash immediately after installation.
- Do not apply to rough, damaged, or poorly painted calipers.
- Always press the edges down firmly.
Durability
Heat-resistant and built for automotive detail use
Carimprasso brake caliper stickers are developed for automotive detail use and are heat-resistant up to approximately 150°C. When installed correctly, they bond firmly and deliver a sharp OEM look.
FAQ
Frequently asked questions
Can I apply the stickers myself?
Yes, you can. As long as the caliper is clean, dry, and grease-free, you can easily apply the stickers yourself.
Can I reapply the sticker if it's crooked?
We advise against this. Peeling the sticker off can reduce the adhesive's effectiveness. Make sure you position it correctly before pressing it down for good.
Can I wash the car immediately after installation?
No, please wait at least 24 hours before washing the car or getting the caliper wet.
Are the stickers suitable for all brake calipers?
The stickers are suitable for smooth, clean, and dry surfaces. On rough, damaged, or heavily soiled calipers, adhesion may be reduced.
Do I need to paint my calipers first?
Not necessarily, but the result looks best on a smooth, clean caliper. On damaged or rough paint, the sticker may not bond as cleanly.
Can I use the stickers after painting my calipers?
Yes. The correct order is: paint the caliper in the desired colour, let it cure fully, then apply the sticker, and finally seal with clear coat. Follow the drying time of the paint used before applying the sticker.
Why Carimprasso?
A premium detail for a sporty look
✓Premium automotive finish
✓Sharp, clean logos
✓Heat-resistant up to 150°C
✓Easy to apply yourself
✓Shipped from the Netherlands
✓Support via WhatsApp
Ready for a sharp caliper upgrade?
Choose your colour, pick the right size, and give your car a sporty OEM look with Carimprasso brake caliper stickers.